The speed input range of the Advance HCT800 marine gearbox is 600-2100 RPM, with engine input power from 1008 kW to 1312.5 kW. the center distance is 450 mm, the reduction ratio range is 4.95-9.00, the transmission capacity range is 0.48-0.49 kW/RPM, the rated propeller thrust is 160 KN, and the input shaft is in the train Opposite to the output shaft.
Advance HCT800 marine gearbox is composed of transmission shaft, output coupling, input coupling, oil pressure gauge, oil Filter, control system, oil pump and other important components.
Advance HCT800 marine gearboxes provides three types of control system which are push-pull flexible shaft, electric control and pneumatic control for customers to choose. To meet the different requirement of coupling with different engine brand and models, Advance HCT800 marine gearboxes provide different SAE size coupling and housing including SAE 00 0, flywheel SAE 21 18 16 is available……
All of our Advance 800 series marine gearbox can provide CCS classification certificate, some of series can provide international classifications with extra costs which mainly including French BV, British LR, American ABS, Japanese NK , Norway DNV-GL, Russia RS, South Korea KR, Italy RINA and other classification societies.
Advantages Of Advance HCT800 Marine Gearbox Parts
Advanced design and sophisticated manufacturing to adapt to various harsh working conditions! High-strength parts, strong ability to work under heavy loads.
Cylinder block and cylinder head adopt integrated design. The occurrence of engine water leakage and oil leakage is prevented, and the parts are about 40% less than other similar engines. The failure rate is greatly reduced.
Using forged steel camshaft and crankshaft, high-strength cylinder block design, multiple parts cast on the cylinder block, high rigidity, high pressure resistance, good reliability, and longer service life.
The cylinder bore adopts a platform mesh honing design. The perfect geometric structure effectively prevents oil leakage, and the use of advanced technology such as new piston ring components and gasket crimping and molding reduces oil loss.
The five key systems of the electronically controlled engine are all developed by DCEC, and have been applied and verified in different fields around the world to ensure the excellent economy and reliability of the product.
By optimizing the control strategy and combining with the actual operating conditions of the equipment, the fuel economy can be further improved.
Technical Specifications
| Gearbox Model: | HCT800 |
| Input Speed: | 600-2100 RPM |
| Power: | 1008-1312.5 kW @ 2100 RPM |
| Center Distance: | 450 mm |
| Trans.Capacity: | 0.48-0.625 kW / RPM |
| Reduction Ratio: | 4.95-8.40 |
| Rated Thrust: | 140 kN |
| Dimension: | 1056 mm * 1280 mm * 1425 mm |
| Net Weight: | 2500 kg |
| Lead Time: | 15-30 Working Days |
| Payment Terms: | T/T ,L/C |
Search by Part No. or Part Name
Click Kit Name to Check Part List
- Input Shaft Assembly
- Transmission Shaft Assembly
- Output Shaft Assembly
- Housing Assembly
- Housing Assembly Two（oil pipe assembly )
- Intermediate Shaft Assembly
- Oil Distributor Assembly
- Toothed Input Coupling Assembly
NO. | Part No. | Part Name | Qty. | Remarks |
| 1 | GB/T5782-2000 M22×170 | Bolt | 10 | / |
| 2 | GB/T93-1987 22 | Spring washer | 10 | / |
| 3 | GB/T5783-2000 M18×40 | Bolt | 3 | / |
| 4 | MB270-03-008 | Lock washer | 1 | Same as 135A-03A-007 |
| 5 | HCT800-01-001 | Plate | 1 | / |
| 6 | GB/T3452.1-2005 φ82.5×5.3 | “O” ring | 1 | / |
| 7 | HCT800-01-002 | Input Coupling | 1 | / |
| 8 | HCT800-01-003 | Oil baffle plate | 1 | / |
| 9 | GB/T305-1998 200 | Holding ring | 1 | / |
| 10 | GB/T288-1994 22319CA/W33 | Bearing | 1 | Added processing |
| 11 | HCT800-01-101 | Input Shaft | 1 | Shrink with right – hand transmission gear |
| 12 | GB/T5783-2000 M14×20 | Bolt | 3 | / |
| 13 | Q20-03A-04 14 | Copper washer | 3 | / |
| 14 | HCT800-01-102-01 | Right – hand Transmission Gear | 1 | Z=35 |
| 15 | HCT800-01-102X1-01 | Right – hand Transmission Gear | 1 | Z=40 Only for i=8.4 |
| 16 | HC600-01-009 | Piston Ring | 1 | / |
| 17 | HC600A-01-006A | Piston | 1 | / |
| 18 | HC600A-01-009A | Spring | 16 | / |
| 19 | HC600A-01-007 | Spring Carrier | 1 | / |
| 20 | GB/T894.1-1986 82 | Snap Ring | 1 | / |
| 21 | HC600-01-018 | Single – face Ex.Disc | 1 | / |
| 22 | MB450-01-014 | Internal Disc | 9 | / |
| 23 | MB450-01-013 | External Disc | 8 | / |
| 24 | HC600-01-007 | Thrust Plate | 1 | / |
| 25 | HC600-01-006 | Snap Ring | 1 | / |
| 26 | GB/T894.1-1986 100 | Snap Ring | 1 | / |
| 27 | HCT800-01-010 | Spacer | 1 | / |
| 28 | HCT800-01-004 | Clutch Bracket | 1 | / |
| 29 | GB/T283-1994 N2224 | Bearing | 1 | Added processing |
| 30 | HCT800-01-005/26 | Pinion | 1 | Z=26，i=4.95 |
| 31 | HCT800-01-005/24 | Pinion | 1 | Z=24，i=5.57；5.68 |
| 32 | HCT800-01-005/23 | Pinion | 1 | Z=23，i=5.93 |
| 33 | HCT800-01-005/22 | Pinion | 1 | Z=22，i=6.43 |
| 34 | HCT800-01-005/21 | Pinion | 1 | Z=21，i=6.86 |
| 35 | HCT800-01-005/20 | Pinion | 1 | Z=20，i=7.33；7.84；8.40 |
| 36 | GB/T288-1994 22322CA/W33 | Bearing | 1 | Added processing |
| 37 | HCT800-01-009 | Holding ring | 1 | / |
| 38 | HCT800-01-006 | Snap Ring | 1 | / |
| 39 | GB/T894.1-1986 110 | Snap Ring | 1 | / |
| 40 | GB/T894.1-1986 70 | Snap Ring | 2 | / |
| 41 | GB/T283-2007 NU314EM | Bearing | 1 | / |
| 42 | 300-01-016 | Sealing | 3 | / |
| 43 | HCT800-01-008AX1 | Oil pump pinion | 1 | Z=40，1530r/min＜n≤1800r/min |
| 44 | HCT800-01-008AX2 | Oil pump pinion | 1 | Z=43，1380r/min＜n≤1530r/min |
| 45 | HCT800-01-008AX3 | Oil pump pinion | 1 | Z=45，1250r/min＜n≤1380r/min |
| 46 | HCT800-01-008AX4 | Oil pump pinion | 1 | Z=47，1130r/min＜n≤1250r/min |
| 47 | HCT800-01-008AX5 | Oil pump pinion | 1 | Z=49，1000r/min＜n≤1130r/min |
| 48 | HCT800-01-008AX6 | Oil pump pinion | 1 | Z=51，850r/min＜n≤1000r/min |
| 49 | HCT800-01-008AX7 | Oil pump pinion | 1 | Z=54，700r/min＜n≤850r/min |
| 50 | HCT800-01-008AX8 | Oil pump pinion | 1 | Z=57，550r/min＜n≤700r/min |
| 51 | GB/T93-1987 10 | Spring washer | 3 | / |
| 52 | GB/T70.1-2000 M10×20 | Screw | 3 | / |
| 53 | Q21-36-01 φ8 | Plug (Au) | 1 | / |
| 54 | Q21-38-01 φ10×10 | Plug | 1 | / |
| ——END—— | ||||
NO. | Part No. | Part Name | Qty. | Remarks |
| 1 | GB/T894.1-1986 95 | Snap Ring | 1 | / |
| 2 | HCT800-02-001 | Snap Ring | 1 | / |
| 3 | GB/T305-1998 200 | Holding ring | 1 | / |
| 4 | GB/T288-1994 22319CA/W33 | Bearing | 1 | Added processing |
| 5 | HCT800-02-101 | Transmission Shaft | 1 | Shrink with left – hand transmission gear |
| 6 | GB/T5783-2000 M14×20 | Bolt | 1 | / |
| 7 | Q20-03A-04 14 | Copper washer | 1 | / |
| 8 | HCT800-02-102-01 | Left – hand Transmission Gear | 1 | Z=35 |
| 9 | HCT800-02-102X1-01 | Transmission Gear | 1 | Z=40 Only for i=8.4 |
| 10 | HC600-01-009 | Piston Ring | 1 | / |
| 11 | HC600A-01-006A | Piston | 1 | / |
| 12 | HC600A-01-009A | Spring | 16 | / |
| 13 | HC600A-01-007 | Spring Carrier | 1 | / |
| 14 | GB/T894.1-1986 82 | Snap Ring | 1 | / |
| 15 | HC600-01-018 | Single – face Ex.Disc | 1 | / |
| 16 | MB450-01-014 | Internal Disc | 9 | / |
| 17 | MB450-01-013 | External Disc | 8 | / |
| 18 | HC600-01-007 | Thrust Plate | 1 | / |
| 19 | HC600-01-006 | Snap Ring | 1 | / |
| 20 | GB/T894.1-1986 100 | Snap Ring | 1 | / |
| 21 | HCT800-01-010 | Spacer | 1 | / |
| 22 | HCT800-01-004 | Clutch Bracket | 1 | / |
| 23 | GB/T283-1994 N2224 | Bearing | 1 | Added processing |
| 24 | HCT800-01-005/26 | Pinion | 1 | Z=26，i=4.95 |
| 25 | HCT800-01-005/24 | Pinion | 1 | Z=24，i=5.57；5.68 |
| 26 | HCT800-01-005/23 | Pinion | 1 | Z=23，i=5.93 |
| 27 | HCT800-01-005/22 | Pinion | 1 | Z=22，i=6.43 |
| 28 | HCT800-01-005/21 | Pinion | 1 | Z=21，i=6.86 |
| 29 | HCT800-01-005/20 | Pinion | 1 | Z=20，i=7.33；7.84；8.40 |
| 30 | GB/T288-1994 22322CA/W33 | Bearing | 1 | Added processing |
| 31 | HCT800-01-009 | Holding ring | 1 | / |
| 32 | HCT800-01-006 | Snap Ring | 1 | / |
| 33 | GB/T894.1-1986 110 | Snap Ring | 1 | / |
| 34 | GB/T894.1-1986 70 | Snap Ring | 2 | / |
| 35 | GB/T283-2007 NU314EM | Bearing | 1 | / |
| 36 | 300-01-016 | Sealing | 3 | / |
| 37 | Q21-36-01 φ8 | Plug | 1 | / |
| 38 | Q21-38-01 φ10×10 | Plug | 1 | / |
| ——END—— | ||||
NO. | Part No. | Part Name | Qty. | Remarks |
| 1 | GB/T283-2007 NJ2232EM | Bearing | 1 | / |
| 2 | HCT800-03-101/54 | Output gear | 1 | Z=54，i=4.95；5.57；5.68；5.93；6.43；6.86；7.33 |
| 3 | HCT800-03-101/55 | Output gear | 1 | Z=55，i=7.84 |
| 4 | HCT800-03-101/56 | Output gear | 1 | Z=56，i=8.4 |
| 5 | HCT800-03-102 | Output shaft | 1 | Shrink with output gear |
| 6 | HCT800-03-001 | Output spacer | 1 | / |
| 7 | GB/T5859-1994 Bearing 29334 | Bearing | 2 | / |
| 8 | HCT800-03-003 | Output spacer | 2 | / |
| 9 | HCT800-03-002 | Output spacer | 1 | / |
| 10 | HCT800-03-004 | Output spacer | 1 | / |
| 11 | GB/T283-2007 NJ234EM | Bearing | 1 | / |
| 12 | HCT800-03-005 | Spacer | 1 | / |
| 13 | GB/T3452.1-2005 160×5.3 | “O” ring | 1 | / |
| 14 | HCT800-03-006 | Output coupling | 1 | Normal |
| 15 | HCT800-03-006X1 | Output coupling | 1 | Special order |
| 16 | HCT800-03-006X2 | Output coupling | 1 | / |
| 17 | HCT800-03-006X3 | Output coupling | 1 | / |
| 18 | GB/T810-1988 M150×2 | Nut | 1 | / |
| ——END—— | ||||
NO. | Part No. | Part Name | Qty. | Remarks |
| 1 | GB/T6170-2000 M12 | Nut | 6 | / |
| 2 | GB/T899-1988 M12×35-8.8 | Bolt | 4 | / |
| 3 | GB/T93-1987 12 | Spring washer | 69 | / |
| 4 | ZCB-B80B-1 | Oil pump | 1 | / |
| 5 | GB/T73-1985 M8×10 | Screw | 1 | / |
| 6 | HCT800-04-010AX1 | Pump driven gear | 1 | Z=40，1530r/min＜n≤1800r/min |
| 7 | HCT800-04-010AX2 | Pump driven gear | 1 | Z=37，1380r/min＜n≤1530r/min |
| 8 | HCT800-04-010AX3 | Pump driven gear | 1 | Z=35，1250r/min＜n≤1380r/min |
| 9 | HCT800-04-010AX4 | Pump driven gear | 1 | Z=33，1130r/min＜n≤1250r/min |
| 10 | HCT800-04-010AX5 | Pump driven gear | 1 | Z=31，1000r/min＜n≤1130r/min |
| 11 | HCT800-04-010AX6 | Pump driven gear | 1 | Z=29，850r/min＜n≤1000r/min |
| 12 | HCT800-04-010AX7 | Pump driven gear | 1 | Z=26，700r/min＜n≤850r/min |
| 13 | HCT800-04-010AX8 | Pump driven gear | 1 | Z=23，550r/min＜n≤700r/min |
| 14 | HC1000-04-023 | Connecting plate | 1 | / |
| 15 | GB/T70.1-2000 M12×25 | Screw | 2 | / |
| 16 | HCT800-04-009 | Gasket | 1 | / |
| 17 | HCT800-04-013 | Pump trans. Cover | 1 | / |
| 18 | HCT800-04-014 | Gasket | 1 | / |
| 19 | HCT800-04-011 | Input shaft rear end cover | 1 | / |
| 20 | GB/T893.1-1986 150 | Snap Ring | 2 | / |
| 21 | HCT800-04-012 | Gasket | 1 | / |
| 22 | GB/T5783-2000 M12×35 | Bolt | 8 | / |
| 23 | HCT800-04-015 | Mid. shaft rear cover | 1 | / |
| 24 | HCT800-04-016 | Gasket | 1 | / |
| 25 | HCT800-04-017 | Mid. shaft rear end cover | 1 | / |
| 26 | GB/T893.1-1986 180 | Snap Ring | 1 | / |
| 27 | HCT800-04-018 | Gasket | 1 | / |
| 28 | GB/T5783-2000 M12×45 | Bolt | 65 | / |
| 29 | HCT800-04-006 | Trans. shaft rear end cover | 1 | / |
| 30 | Q21-38-01 φ10×10 | Plug | 2 | / |
| 31 | HCT800-04-008 | Distributor | 2 | / |
| 32 | GB/T819.1-2000 M6×14 | Screw | 6 | / |
| 33 | HCT800-04-007 | Gasket | 1 | / |
| 34 | GB/T3452.1-2005 12.5×2.65 | “O” ring | 2 | / |
| 35 | GB/T5783-2000 M6×16 | Bolt | 4 | / |
| 36 | GB/T93-1987 6 | Spring washer | 4 | / |
| 37 | HCT800-04-300 | Sprayer assembly | 1 | / |
| 38 | HCT800-04-031 | Gasket | 1 | / |
| 39 | GB/T869-1986 2.5×8 | Rivet | 4 | / |
| 40 | Q25-13-01、02C | HC nameplate | 1 | / |
| 41 | GB/T93-1987 20 | Spring washer | 1 | / |
| 42 | GB/T5782-2000 M20×110 | Bolt | 1 | / |
| 43 | GB/T93-1987 24 | Spring washer | 52 | / |
| 44 | GB/T6170-2000 M24 | Nut | 24 | / |
| 45 | GB/T93-1987 16 | Spring washer | 25 | / |
| 46 | GB/T6170-2000 M16 | Nut | 10 | / |
| 47 | HCT800-04-023 | Orifice plug | 1 | / |
| 48 | HCT800-04-101A | Upper housing | 1 | Supply as a group with middle and lower housing |
| 49 | GB/T5782-2000 M24×120 | Bolt | 2 | / |
| 50 | GB/T118-2000 B16×60 | Taper pin | 2 | / |
| 51 | GB/T5783-2000 M8×30 | Bolt | 20 | / |
| 52 | MB450-04-500 | Breathing cap set | 1 | / |
| 53 | HCT800-04-002 | Gasket | 1 | / |
| 54 | HCT800-04-001 | Front window cover | 1 | / |
| 55 | HCT800-04-004 | Gasket | 1 | / |
| 56 | HCT800-04-003 | Rear window cover | 1 | / |
| 57 | GB/T827-1986 2×6 | Rivet | 4 | / |
| 58 | Q25-06-01 | Rotation arrow | 2 | / |
| 59 | GB/T5782-2000 M24×310 | Bolt | 2 | / |
| 60 | LG1.8-00 | Cooler | 1 | / |
| 61 | GB/T5783-2000 M16×50 | Bolt | 5 | / |
| 62 | GB/T5782-2000 M24×210 | Bolt | 4 | / |
| 63 | GB/T5783-1986 M16×80 | Bolt | 10 | / |
| 64 | HCT800-04-102 | Middle housing | 1 | Supply as a group with upper and lower housing |
| 65 | GB/T118-2000 6×16 | Taper pin | 4 | / |
| 66 | HCT800-04-005 | Trans. shaft front cover | 1 | Used without bell housing |
| 67 | HCT800-04-005X1 | Trans. shaft front cover | 1 | Used with bell housing |
| 68 | GB/T3452.1-2005 190×3.55 | “O” ring | 2 | / |
| 69 | HCT800-04-027X1 | Gasket | 1 | Used without bell housing |
| 70 | HCT800-04-027X2 | Gasket | 1 | Used with bell housing |
| 71 | HCT800-04-026X3 | Bell housing | 1 | SAE00# |
| 72 | HCT800-04-026X2 | Bell housing | 1 | SAE0# |
| 73 | HCT800-04-026X1 | Mid. shaft front cover | Used without bell housing | |
| 74 | HCT800-04-024 | Input front cover | 1 | / |
| 75 | Q21-38-01 φ10×10 | Plug | 2 | / |
| 76 | HCT400A-05-021 | Wind board | 1 | Used with bell housing |
| 77 | GB/T93-1987 8 | Spring washer | 2 | Used with bell housing |
| 78 | GB/T5783-2000 M8×16 | Bolt | 2 | Used with bell housing |
| 79 | HCT800-04-032 | Pad | 2 | / |
| 80 | GB/T898-1988 M12×130 | Bolt | 2 | / |
| 81 | LQ200S-00 | Binocular oil filter | 1 | / |
| 82 | HCT800-04-021 | Output shaft front cover | 1 | / |
| 83 | HCT800-04-022 | Gasket | 1 | / |
| 84 | GB/T825-1988 M24 | Screw | 1 | / |
| 85 | Q27-01-00-12 | Oil dipstick set 500 | 1 | / |
| 86 | GB/T5783-2000 M10×30 | Bolt | 4 | / |
| 87 | GB/T97.1-2002 10 | Flat washer | 4 | / |
| 88 | HCT800-04-028 | Oil shield | 1 | / |
| 89 | GB/T6170-2000 M27 | Nut | 4 | / |
| 90 | GB/T93-1987 27 | Spring washer | 10 | / |
| 91 | GB/T118-2000 B20×80 | Taper pin | 2 | / |
| 92 | HCT800-04-103 | Lower housing | 1 | Supply as a group with upper and middle housing |
| 93 | GB/T13871.1-2007 FB200×240×18 | Oil seal | 2 | / |
| 94 | HCT800-04-019 | Output shaft rear end cover | 1 | / |
| 95 | HCT800-04-020 | Gasket | 1 | / |
| 96 | GB2089-2009 2×10×55 | Spring | 12 | / |
| 97 | Q21-15A-02 M22×1.5 | Drain plug | 1 | / |
| 98 | Q20-03A-08 22 | Copper washer | 1 | / |
| 99 | HCT800-04-030 | Flange gasket | 1 | / |
| 100 | HCT800-04-029 | Flange | 1 | / |
| 101 | GB/T93-1987 8 | Spring washer | 4 | / |
| 102 | GB/T5783-2000 M8×25 | Bolt | 2 | / |
| 103 | GB/T70.1-2000 M8×65 | Screw | 2 | / |
| 104 | GB/T5782-2000 M27×250 | Bolt | 1 | / |
| 105 | GB/T5782-1986 M27×260 | Bolt | 3 | / |
| 106 | GB/T5782-2000 M27×170 | Bolt | 2 | / |
| 107 | GB/T5782-2000 M24×110 | Bolt | 20 | / |
| ——END—— | ||||
NO. | Part No. | Part Name | Qty. | Remarks |
| 1 | HCT800-04-600B | Inlet pipe assembly | 1 | / |
| 2 | JB/T982-1977 42 | bonded washer | 4 | / |
| 3 | HCT800-04-900 | Ahead Lub pipe assembly | 1 | / |
| 4 | HCT800-04-1000 | Lub pipe assembly | 1 | / |
| 5 | HCT800-04-500 | Output pipe assembly of cooler | 1 | / |
| 6 | HCT800-04-1200 | Lub pipe assembly | 1 | / |
| 7 | HCT800-04-1400 | Inlet pipe assembly | 1 | / |
| 8 | JB/T982-1977 33 | bonded washer | 4 | / |
| 9 | HCT800-04-800 | Ahead hydraulic pipe assembly | 1 | / |
| 10 | HCT800-04-800X1 | Ahead hydraulic pipe assembly | 1 | / |
| 11 | Q20-03A-04 14 | Copper washer | 19 | / |
| 12 | HCT800-04-400A | Output pipe assembly of pump | 1 | / |
| 13 | HCT800-04-400AX1 | Output pipe assembly of pump | 1 | Match with the right – hand engine |
| 14 | HCT800-04-1300 | Sprayer assembly | 1 | / |
| 15 | HCT800-04-1100 | Sprayer assembly | 1 | / |
| ——END—— | ||||
NO. | Part No. | Part Name | Qty. | Remarks |
| 1 | GB/T5783-2000 M24×40 | Bolt | 3 | / |
| 2 | HCT800-05-006 | Lock washer | 1 | / |
| 3 | HCT800-05-005 | Plate | 1 | / |
| 4 | GB/T276-1994 6220 | Bearing | 1 | / |
| 5 | HCT800-05-004 | Spacer | 1 | / |
| 6 | GB/T283-2007 NJ2324EM | Bearing | 1 | / |
| 7 | HCT800-05-003 | Spacer | 1 | / |
| 8 | HCT800-05-002/50 | Gear | 1 | Z=50，i=4.95 |
| 9 | HCT800-05-002/52 | Gear | 1 | Z=52，i=5.57 |
| 10 | HCT800-05-002/53X | Gear | 1 | Z=53，i=5.68 |
| 11 | HCT800-05-002/53 | Gear | 1 | Z=53，i=5.93 |
| 12 | HCT800-05-002/55 | Gear | 1 | Z=55，i=6.43 |
| 13 | HCT800-05-002/56 | Gear | 1 | Z=56，i=6.86 |
| 14 | HCT800-05-002/57 | Gear | 1 | Z=57，i=7.33；7.84；8.4 |
| 15 | HCT400A-03-006 | Washer | 1 | / |
| 16 | HCT800-05-001/19 | Intermediate Shaft | 1 | Z=19，i=8.4 |
| 17 | HCT800-05-001/20 | Intermediate Shaft | 1 | Z=20，i=7.84 |
| 18 | HCT800-05-001/21 | Intermediate Shaft | 1 | Z=21，i=4.95；5.57；5.68；5.93；6.43；6.86；7.33 |
| 19 | GB/T1096-2003 36×20×140 | Key | 1 | / |
| 20 | GB/T283-2007 NJ2326EM | Bearing | 1 | / |
| ——END—— | ||||
NO. | Part No. | Part Name | Qty. | Remarks |
| 1 | HCT800-06-006A | Gasket | 1 | / |
| 2 | HCT800-06-005A | Oil Distributor | 1 | Use astern as ahead，with HCT800-04-800X1 |
| 3 | HCT800-06-005AX1 | Oil Distributor | 1 | / |
| 4 | Q06-13A-00-C1 | Hydraulic control system | 1 | Manual |
| 5 | DK-H2 | Hydraulic control system | 1 | Electrical |
| 6 | QK-H2 | Hydraulic control system | 1 | Pneumatic |
| 7 | Q20-03A-05 16 | Copper washer | 1 | Option |
| 8 | Q20-01-05 M16×1.5 | Plug | 1 | Option |
| 9 | Q21-15A-02 M22×1.5 | Drain plug | 4 | Option |
| 10 | Q20-03A-08 22 | Copper washer | 7 | Option |
| 11 | YK60-Ⅲ/0-2.5MPa | Gauge | 1 | Option |
| 12 | GB/T5782-2000 M14×70 | Bolt | 4 | / |
| 13 | GB/T93-1987 14 | Spring washer | 4 | / |
| 14 | GB/T2089-2009 1.2×10×35 | Spring | 1 | / |
| 15 | 300-06A-003 | Lib. valve stem | 1 | / |
| 16 | Q20-03A-04 14 | Copper washer | 2 | / |
| 17 | Q20-01-04 M14×1.5 | Plug | 2 | / |
| ——END—— | ||||
NO. | Part No. | Part Name | Qty. | Remarks |
| 1 | HGTLX8.6/21-03 | Internal Toothed Ring | 1 | For SAE21″ flywheel |
| 2 | Q26-06-03 | Toothed Rubber Block | 56 | For SAE21″ flywheel |
| 3 | HCT800/1-08-001 | External Toothed Ring | 1 | For SAE21″ flywheel |
| 4 | GB/T93-1987 22 | Washer | 10 | For SAE21″ flywheel |
| 5 | GB/T5782-2000 M22×60 | Bolt | 10 | For SAE21″ flywheel |
| 6 | HGTLX8.6/18-03 | Internal Toothed Ring | 1 | For SAE18″ flywheel |
| 7 | Q26-06-03 | Toothed Rubber Block | 56 | For SAE18″ flywheel |
| 8 | HCT800/1-08-001 | External Toothed Ring | 1 | For SAE18″ flywheel |
| 9 | GB/T93-1987 22 | Washer | 10 | For SAE18″ flywheel |
| 10 | GB/T5782-2000 M22×60 | Bolt | 10 | For SAE18″ flywheel |
| 11 | HGTLX8.6/16-03 | Internal Toothed Ring | 1 | For SAE16″ flywheel |
| 12 | Q26-06-03 | Toothed Rubber Block | 56 | For SAE16″ flywheel |
| 13 | HCT800/1-08-001 | External Toothed Ring | 1 | For SAE16″ flywheel |
| 14 | GB/T93-1987 22 | Washer | 10 | For SAE16″ flywheel |
| 15 | GB/T70.1-2000 M22×60 | Bolt | 10 | For SAE16″ flywheel |
| 16 | Q05-17X1-02 | Internal Toothed Ring | 1 | For SAE14″ flywheel |
| 17 | Q26-06-03 | Toothed Rubber Block | 48 | For SAE14″ flywheel |
| 18 | HCT800-08-001 | External Toothed Ring | 1 | For SAE14″ flywheel |
| 19 | GB/T93-1987 22 | Washer | 10 | For SAE14″ flywheel |
| 20 | GB/T5782-2000 M22×60 | Bolt | 10 | For SAE14″ flywheel |
| ——END—— | ||||
Note: All Above Data are Just for Reference, All Data Might Change Without Notices or Updates, Please Contact Our Sales Team to Confirm All Details Via WhatsApp or Email.
Engine Sale Manual
Installation Drawing
Installation Manual
Operation Manual
Parts Catalogue
Report & Certifcate
Tags:
![](/wp-content/uploads/2021/08/WhatApp-Icon.png"){kind=icon}